Peavey is one of the most famous brands in music. They are also now introducing their new CS 800 series, and making a big push into live streaming with this unit. Peavey has had some issues with audio quality in previous models so they went from 8 to 16-channel processing for this model, which includes 5 preamps that work as channels 2 through 6 on the back panel and another 5 preamps on the front panel for individual instruments or microphone setups.
The “peavey cs 800x specs” is a review of the Peavey CS800. It is a guitar amplifier that has two channels and a digital reverb. The amp has an input for an MP3 player, USB port, and aux input.
We earn money from qualifying purchases made on our website as an Amazon Associate.
The Peavey CS 800 is intended for commercial use and to supplement the high-end performance demanded by many studios and residential applications. Peavey CS 800 has become the most sought after throughout the years because to its improved circuit system, design, and semiconductors. This page examines its key characteristics, as well as the current cost.
Table of Contents
The Peavey CS 800 amplifier has certain unique features that set it apart from other amplifiers. The following are some of the more noteworthy specifications:
1. Maximum Rated Power
- 600 W RMS per channel at 2 ohms
- 4 ohms per channel, 420 W RMS
- 8 ohms per channel, 260 W RMS
Mono, Bridge Mode
- 1,200 W RMS at 4 ohms
- 840 W RMS at 8 ohms
2. Frequency reaction
- 4 ohms, 20 Hz to 20 kHz Stereophonic Mode
- 5-1/4″ in height
- 19′′ in width
- 14-5/8″ depth
4. Body mass index
The Peavey CS 800 amplifier offers a number of unique characteristics that set it apart from other amplifiers. They are as follows:
- System for refilling two-speed fans that is fully automated
- Autonomous defect detection and prevention
- Turning on and off the lights is a project that is only available for a limited time.
- Plug-in modules may be plugged into one single crossover socket.
- For PL – 2’s, there are two recessed equalized intake transformer sockets.
- Singular XLR and phone plug inputs are even synchronized.
- Each track has a DDT activation LED and a power LED.
- DDT setback and bridge method choose slip switches are located on the rear panel.
The Peavey CS 800 has a 400W power output. It is exceptional because it is very durable in retail settings and retains the high level of execution necessary in office and domestic settings.
The Peavey CS 800 amplifier is a little pricey. However, acquiring the amplifier comes with a five-year guarantee, ensuring that you will get your money back in the event of any damage. As a result, the extended warranty ensures both quality and value.
List of Components
The Peavey CS 800 includes vital pieces that let it to perform and delight you, allowing it to roar in the market with its greatest qualities. They are as follows:
When DDT compression is taking place, the “Active LED” illuminates. When the clipping contortion occurs with the setback switch in the setback position, the LED blinks.
When the amplifier’s AC power is turned on and the corresponding channel is operational, it brightens. During the power-up phase, brightness is reduced somewhat due to momentary suppression or thermal fault circuits.
The track shutters down and the corresponding power LED goes off if either channel meets fault situations or exceeds the stable functioning temperature criteria, suggesting that such conditions occur.
In addition, anytime the bridge approach is used, the power LED on track B is vetoed (turned off), as if channel B had erroneous circumstances. This suggests that the CS 800 is operating in bridge mode.
Pilot Lamp / On/Off Switch
The CS 800’s first panel has a traditional On/Off switch with an integrated pilot bulb.
Initiating the button should light the pilot indication lamp when the Peavey CS 800 is clogged into a beneficial power base. The failure of the pilot lamp to light might signal a blown line fuse or a malfunctioning power supply.
The internal cooling fan’s speed is controlled by the Fan speed switch, and the inside light indicates temperature shut down circumstances. Low-speed operations will offer enough cooling for most applications.
However, for long-term high-power applications, high-speed operation is suggested to minimize power termination due to overheating.
It’s located on the back panel. In most cases, the mode switch should be set to stereo. In specific crossover situations, you should not utilize the bridge mode unless the amplifier is employed in a retail sound dispersion system. Unexpectedly switching to the bridge approach might cause the speakers’ construction to be destroyed.
The Peavey CS 800’s crossover patch panel offers a highly versatile method for facilitating balanced inputs and identical crossover webs. These attributes aren’t found in any other stereo-powered amplifier on the market today.
This switch is used to enable or disable the DDT constrictor.
The PL- Module electronic crossover’s crossed-over low-frequency output is replenished using this tool. To create a working bi-amp structure, connect the output to the appropriate power amplifier intake jack.
This utility replaces the PL-Module electrical crossover’s crossed-over high-frequency result. To create a functional bi-amp structure, connect the output to the appropriate power amplifier intake jack.
During amplifier output constriction, the clipping LED indicator illuminates, indicating that the compressor is working. This occurs most often when the compressor is disabled by removing the level control on the related channel.
During any clipping scenario, the LED indication will illuminate, providing a clear warning to avoid serious Peavey CS 800 deformation.
The fuse is located within the fuse holder’s lid. If the fuse fails, it must be fixed with the identical sort and quality to avoid causing harm to the device and preventing the warranty from being revoked. If the fuse continues to blow, the gadget should be repaired by a professional.
The Peavey CS 80 manual is a document that is often provided during the buying process. The handbook explains how the Peavey CS 800’s different components function.
It will assist you in identifying and troubleshooting the issue even after the warranty term has expired. As a result, it’s essential to keep the instructions secure.
For further information, see the Peavey CS 800 handbook.
The Peavey CS 800 Service Guide is usually a manual used to indicate the maintenance services to be offered to the amplifier. The Service Guide should alert you of the maintenance on the Peavey CS 800. It is permanently attached in the form of a document with the warranty document. Thus, it would help if you kept it safe as well.
Is The Peavey CS 800 S Worth Buying?
Many people still think the CS 800 is a fantastic amplifier. This is due to the fact that it has an extremely clear treble and bass. The CS 800, after all, uses the same amp circuit as the original CS 800. Yes, the Peavey CS 800 S amplifiers are excellent.
Due to its features and superior sound quality, the Peavey CS 800 is one of the most excellent amplifiers available today. If you need to branch out from the usual amplifier brackets and try something different, the Peavey CS 800 should always be your first choice.
The “peavey cs-800 weight” is a speaker that has been made by Peavey. It was released on the market in 2017, and it became popular due to its quality sound. The speaker weighs about 9kg, which makes it perfect for home use.
- peavey cs 800 for sale
- peavey cs 800 manual
- peavey cs 800 price
- vintage peavey cs 800
- peavey cs-800 service manual