Windows stop codes are error messages that appear when Windows encounters a problem. This article covers how to find and fix these errors, with tips for both beginners and advanced users.
The “windows 11 stop code” is a problem that has been present for a while. There are many ways to fix this issue. Here are 10 of them.
So you’re encountering computer issues that are preventing it from working smoothly? This is a regular occurrence with computers. Stop code failures in Windows may take various shapes, but they all have one thing in common: they are inconvenient! Fortunately, there are a few easy actions you may take to locate and correct these problems so you can get back to work. These procedures will assist you in determining the kind of mistake and providing a remedy for each scenario.
The blue screen of death, often known as “BSOD,” occurs when Windows 10 crashes for any reason. A STOP error code will also appear. A hexadecimal number with three groups of two digits is commonly used. A fast Google search will tell you what that error code signifies, but knowing the precise hexadecimal number isn’t required; understanding the sort of stop code problem you’re dealing with is.
This section will show you how to figure out what Windows Stop Code Error message is on your screen and then help you figure out what’s causing it.
Table of Contents
- 1 What Causes a Windows Stop Code Error?
- 2 How to Repair a Stop Code Error in Windows
- 3 1) Turn Off Your Computer
- 4 2) Execute SFC and CHKDSK.
- 5 3) Check using WinDbg to see what caused the Stop Error.
- 6 4) Defragment the Windows Registry
- 7 6) Make sure your device drivers are up to current.
- 8 7) Turn off all startup programs
- 9 8) Scan for viruses and malware
- 10 9) Install the most recent version of Windows.
- 11 10) Restore the system to its original state.
- 12 Conclusion
What Causes a Windows Stop Code Error?
To understand how to resolve a specific stop code problem, you must first comprehend what causes these errors and how they are related to Windows.
When the operating system tries to load a program, it may run across a problem that renders it risky or impossible to continue. When this occurs, one of these stop code messages will appear on your screen. This error message may include information that might assist you in determining the specific issue. Frequently, it does not.
This section discusses how to identify the most common causes of Windows stop code issues and how to fix them!
One of these blue screen messages appears when your computer’s Microsoft operating system crashes or fails to launch correctly. It’ll either be a hexadecimal number with three sets of two digits (e.g., 0x00000024) or something like “PAGE FAULT IN NONPAGED AREA,” which doesn’t contain any error codes but instead informs you what sort of stop code problem is happening.
How to Repair a Stop Code Error in Windows
1) Turn Off Your Computer
Restarting the computer is the simplest and most popular technique to resolve Windows stop code issues, but it is also the least successful. Windows will reset the internal state of the application that was executing at the time of the crash when you restart the machine. This may help you prevent seeing this stop code error message in the future by repairing faulty memory files or other problems that are causing your machine to fail.
Occasionally, the machine may self-correct by enabling you to re-enter Windows and attempt what it was doing. If this strategy does not work, do not waste your time trying it again; there are more effective alternatives available.
2) Execute SFC and CHKDSK.
SFC (System File Checker) is a Windows utility that verifies the integrity of system files, including Microsoft DLLs. A DLL file is similar to a computer’s instruction manual; it advises the operating system what to perform in certain scenarios. Stop code issues may occur when one of these files is faulty or improperly installed, and they are very difficult to resolve without removing and reinstalling the problematic files.
The SFC command will utilize your computer’s most recent restoration point to replace any Microsoft DLLs that have been hacked or broken with their earlier, backup versions. Non-Microsoft DLLs, on the other hand, may still be corrupted and causing your stop code issues.
Follow these instructions to start the sfc in Windows 10:
- Start your computer.
- To access the Start Menu, use the Windows key.
- In the search box, type “cmd.”
- Run as Administrator by right-clicking on the “Command Prompt” option that opens.
- Type “SFC /scannow” into the Command Prompt and press Enter.
CHKDSK (Check Disk) is a Windows tool that examines the file system of your computer’s disks to ensure that they are free of corruption or other problems that might result in stop code errors. It won’t be able to fix the issues on its own, but it will be able to recognize where they are occurring. CHKDSK, like SFC, can check for faults by using the most recent restoration point on your machine.
Follow these instructions to run chkdsk in Windows 10:
- Start your Windows 10 computer.
- To access the Start Menu, use the Windows key.
- In the search box, type “cmd.”
- Run as Administrator by right-clicking on the Command Prompt option that displays.
- Type “chkdsk /f” into the Command Prompt and press Enter.
Run SFC and CHKDSK from a bootable Windows installation disk.
If your computer will not start or you are unable to reach the Command Prompt, you may use a bootable installation disk or flash drive to execute SFC and CHKDSK.
The following are the steps to use a bootable disk:
- Plug the installation disk into your computer’s CD/DVD drive, or connect the flash drive to any USB port.
- Start your computer again.
- When you see the “Press any key to boot from CD/DVD…” prompt on your screen, press any key to boot from the installation disk or flash drive.
- Choose “SFC /scannow” from the main menu on the installation disk.
- On the page that informs you what faults SFC identified, choose “chkdsk /f” to execute.
3) Check using WinDbg to see what caused the Stop Error.
You may use a program called WinDbg to figure out what is causing your computer’s stop code issues. When a software fails, you may use this tool from Microsoft to analyze the contents of memory. The condition of Windows, drivers, and any other applications that were operating at the moment are all included in this data.
WinDbg is simple to use, but it takes some time to figure out what you’re looking at. Go here to learn more about how to use WinDbg.
4) Defragment the Windows Registry
The Windows Registry is a database that stores all of the data about your computer’s programs, settings, and preferences. You’ll need to use a tool that can clear up your computer’s registry to resolve stop code issues caused by damaged registry files or settings that were set to wrong values by third-party apps installed on your computer.
CCleaner, a free system optimization and privacy application, is one of these programs. It offers a tool that enables you to check for and fix issues in your Windows Registry. In many situations, this will fix stop code errors since the issues they were experiencing were caused by registry mistakes.
Follow these instructions to launch CCleaner and scan for registry errors:
- The CCleaner utility may be downloaded from the official website.
- Click the Start Menu in the lower-left corner of your screen in Windows.
- To launch CCleaner, type “CCleaner” into the search window that displays and click enter.
- Select Registry from the CCleaner screen.
- You should notice a button that reads “Scan for Issues” — click it to begin checking your registry for issues like stop code errors.
Stop code problems may also be caused by RAM faults. RAM works by temporarily storing data and applications in its memory before transferring them to your computer’s hard drive at a later date. This implies that when you turn off your computer, the contents in RAM are erased. In general, RAM is an efficient method for a computer to manage multitasking, but it may get clogged over time with temporary files and data kept in memory while a program was running, resulting in stop code issues.
Follow these steps to launch the Windows Memory Diagnostics Tool:
- To access the Start Menu, log in to Windows 10 and hit the Windows logo key.
- In the search field that displays, type “memory” and press Enter.
- When “Windows Memory Diagnostics Tool” appears in the results list, click it.
- Choose whether to restart your computer immediately and check for faults or to do so the next time you turn it on.
- You may scan the system straight quickly when it has restarted, or you can utilize the “Advanced” options to perform a more extensive test, such as “Test mix” or “Pass count.”
- To begin the test, press the F10 key. Select your preferred option, and the system will resume.
- The Windows Memory Diagnostics Tool will run immediately on the next startup and test your computer’s memory. Depending on the amount and speed of your RAM, this operation might take anywhere from 30 minutes to two hours.
6) Make sure your device drivers are up to current.
Faulty device drivers may also produce stop code issues. When device drivers, such as video and other hardware drivers, are not installed correctly or contain outdated information about the resources required to execute your computer’s applications and programs, stop code problems may occur.
To update your computer’s device drivers, follow these steps:
- Search for “Device Manager” in the Start Menu’s search box.
- When Device Manager appears in the list of results, click it to open it.
- A list of devices connected to your computer should appear. You can view what drivers are installed for each device by clicking on it (if they’re outdated, this might result in stop code issues).
- To update your device drivers automatically, choose “Update Driver Software.”
If you want to manually update your drivers, you may do so by going to your manufacturer’s website and downloading the most recent versions.
7) Turn off all startup programs
It’s possible that having a lot of starting apps can slow down your computer and cause stop code issues. Because Windows loads startup applications automatically, if you have too many or ones that aren’t needed, your boot-up time will be slowed.
To turn off starting programs, do the following:
- In the lower-left corner of your screen, go to the Start Menu and enter “Task Manager” into the search field.
- To access the advanced Task Manager screen, choose “More Details” from the Task Manager menu.
- To view all of your starting apps, go to “Startup” and deactivate any that you don’t need.
8) Scan for viruses and malware
Occasionally, the problem is caused by a virus or malware that has seized control of your computer and is creating the error.
To check for viruses or malware, do the following:
- Search for “Windows Defender” in the Start Menu’s search box.
- When Windows Defender appears in the search results, click it to launch it.
- “Virus & threat protection” and then “Virus & threat protection settings” are the two options.
- Choose whether to activate real-time protection and cloud-based protection on the following page, and then restart your computer.
- You may also click “Scan” and choose the sort of check you want to perform if you want to manually scan for viruses (such as quick, full, or custom)
9) Install the most recent version of Windows.
Stop code issues may be resolved by installing the most recent version of your computer’s operating system. A lot of enhancements in terms of stability and security have been implemented, preventing stop code errors from occuring as often as they formerly did. Furthermore, the sheer number of additional features means you’ll have more resources to work with when it comes to designing a reliable, efficient operating system.
To get the most recent version of Windows 10, go to Settings > Update & Security > Windows Update and check for updates.
If no updates are available at this time, or if you want to upgrade your computer’s operating system completely, go to Microsoft’s website and buy an upgrade copy of the most current Windows 10 edition.
10) Restore the system to its original state.
If you’ve tried all of the other solutions on this list and your stop code issues persist, it’s time to restore your system. A system restore reinstalls your computer’s operating system without losing any personal information or files, thus it returns your machine to the condition it was in when you bought it, even if it was suffering major problems.
To do a system restore, follow these steps:
- In the bottom-left corner of your computer screen, click the Windows symbol.
- Select Update & Security from the drop-down menu under Settings.
- Under the Advanced Startup section, click Restart Now.
- Wait for your computer to enter Recovery mode once it has rebooted.
- Select Troubleshoot > Advanced Options > System Restore from the Troubleshoot menu.
- Follow the on-screen instructions to restore your computer’s operating system to a previous state when stop code problems were not present.
Stop code issues are aggravating, but they’re also quite simple to solve. Simply make sure your computer is up to date, check the programs running in the background to ensure they aren’t slowing it down, and, if required, execute a system restore. You may get rid of your stop code issues for good if you follow this instructions.
Articles Related to This:
Windows 10 is stuck at the “Getting Windows Ready” screen, and there are 6 ways to fix it.
Why Does Windows 10 Refuse to Shut Down?
StopCode Error: Bad System Config Info There Are 7 Ways To Fix It
7 Signs Your Graphics Card Needs to Be Upgraded
The “how to fix blue screen windows 10 2021” is a problem that can be fixed by using the steps listed below. The article also provides information on how to find and fix Windows stop code errors.
Frequently Asked Questions
How do I fix the Windows 10 stop code?
A: This is a computer-specific problem and may require an expert to repair.
What causes stop code in Windows 10?
A: Stop code is a error or problem that causes your computer to freeze or display an error message. Some reasons for stop codes include faulty hardware, malware and malfunctioning software.
How do I fix Windows stop code bad system config information?
A: The bad system config information can be caused when a program in Windows is interrupted. This, for instance, could happen due to some unexpected event such as you were too distracted by something else and didnt have enough time to save your work or close the application before it closed on its own. You may also see this message if youre running an old version of Windows that doesnt support certain features anymore which would mean theres not much Microsoft could do about it.
- windows.com/stop code
- windows stop code windows 10
- how do i fix the windows 10 stop code
- www.windows.com/stopcode memory management
- windows 10 blue screen error codes